Wolf E Series legacy: models, error codes and repair

Wolf built-in oven error code E61

Wolf error code E61: the appliance is measuring its own electricity supply and does not like what it sees, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E62

Wolf error code E62: the appliance is measuring its own electricity supply and does not like what it sees, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E63

Wolf error code E63: the appliance is measuring its own electricity supply and does not like what it sees, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E81

Wolf error code E81: the appliance measures its own supply and its own relays on power-up, and that measurement did not complete, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E85

Wolf error code E85: a switching device is passing current when the control has told it to stop, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E86

Wolf error code E86: the appliance has recorded something it cannot describe further, usually alongside another code, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E87

Wolf error code E87: a switching device is passing current when the control has told it to stop, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E88

Wolf error code E88: the vent path that lets the cooking space breathe is not moving or not sealing, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code: probe shorted

Wolf error code, the kind with no number: probe shorted on a built-in oven — a switching device is passing current when the control has told it to stop, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What it covers, what to check first, and what it does not tell you, on built-in ovens & steam ovens.

Wolf built-in oven error code E01

Wolf error code E01: the board is reading something impossible, and the usual reason on this equipment is damp rather than a dead component, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E02

Wolf error code E02: the board is reading something impossible, and the usual reason on this equipment is damp rather than a dead component, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E03

Wolf error code E03: the control's own software or stored settings did not check out, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E04

Wolf error code E04: the control's own software or stored settings did not check out, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E05

Wolf error code E05: the control's own software or stored settings did not check out, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E06

Wolf error code E06: the board that switches the appliance's loads, or the one that drives the display, has reported an internal error, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E09

Wolf error code E09: a temperature sensor is reading a value the control knows cannot be true, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E10

Wolf error code E10: a temperature sensor is reading a value the control knows cannot be true, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E11

Wolf error code E11: the board that switches the appliance's loads, or the one that drives the display, has reported an internal error, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E12

Wolf error code E12: the board that switches the appliance's loads, or the one that drives the display, has reported an internal error, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E13

Wolf error code E13: the board is reading something impossible, and the usual reason on this equipment is damp rather than a dead component, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E17

Wolf error code E17: the board is reading something impossible, and the usual reason on this equipment is damp rather than a dead component, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E18

Wolf error code E18: the meat probe circuit is reading something that is not food, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E25

Wolf error code E25: a temperature sensor is reading a value the control knows cannot be true, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E26

Wolf error code E26: a temperature sensor is reading a value the control knows cannot be true, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E27

Wolf error code E27: a temperature sensor is reading a value the control knows cannot be true, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E33

Wolf error code E33: the board that switches the appliance's loads, or the one that drives the display, has reported an internal error, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E34

Wolf error code E34: the board that switches the appliance's loads, or the one that drives the display, has reported an internal error, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E35

Wolf error code E35: the appliance lost power in the middle of doing something and stopped where it was, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E36

Wolf error code E36: the board that switches the appliance's loads, or the one that drives the display, has reported an internal error, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E37

Wolf error code E37: the board that switches the appliance's loads, or the one that drives the display, has reported an internal error, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E38

Wolf error code E38: the appliance lost power in the middle of doing something and stopped where it was, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E46

Wolf error code E46: the cleaning cycle did not behave as it should — either the cavity did not heat the way the control expects, or it went past where it should have stopped, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E48

Wolf error code E48: the cleaning cycle did not behave as it should — either the cavity did not heat the way the control expects, or it went past where it should have stopped, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E49

Wolf error code E49: the board is reading something impossible, and the usual reason on this equipment is damp rather than a dead component, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E50

Wolf error code E50: the board is reading something impossible, and the usual reason on this equipment is damp rather than a dead component, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E51

Wolf error code E51: the board that switches the appliance's loads, or the one that drives the display, has reported an internal error, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E54

Wolf error code E54: a mechanical or wiring component has been named, rather than a circuit, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E55

Wolf error code E55: a mechanical or wiring component has been named, rather than a circuit, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E56

Wolf error code E56: the control's own software or stored settings did not check out, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E57

Wolf error code E57: the appliance is measuring its own electricity supply and does not like what it sees, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E58

Wolf error code E58: the appliance is measuring its own electricity supply and does not like what it sees, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code E59

Wolf error code E59: the appliance is measuring its own electricity supply and does not like what it sees, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code CHECKSUM

Wolf error code CHECKSUM: the control's own software or stored settings did not check out, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 07

Wolf error code 07: the control asked for heat and did not see the current that should have followed, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 07 0 32

Wolf error code 07 0 32: the appliance has recorded something it cannot describe further, usually alongside another code, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 07 X 38

Wolf error code 07 X 38: the motorized door lock did not reach the position it was told to reach, or did not report reaching it, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 07026

Wolf error code 07026: a temperature sensor is reading a value the control knows cannot be true, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 07028

Wolf error code 07028: two boards inside the appliance have stopped hearing each other, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 07029

Wolf error code 07029: two boards inside the appliance have stopped hearing each other, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 07033

Wolf error code 07033: the appliance has recorded something it cannot describe further, usually alongside another code, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 07035

Wolf error code 07035: the control asked for heat and did not see the current that should have followed, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 07036

Wolf error code 07036: a switching device is passing current when the control has told it to stop, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 08 0 0

Wolf error code 08 0 0: the control panel is reporting a key or a sensing pad that is not behaving, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 0801

Wolf error code 0801: two boards inside the appliance have stopped hearing each other, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 1000

Wolf error code 1000: two boards inside the appliance have stopped hearing each other, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 01

Wolf error code 01: a switching device is passing current when the control has told it to stop, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 03

Wolf error code 03: the control asked for heat and did not see the current that should have followed, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 04

Wolf error code 04: the motorized door lock did not reach the position it was told to reach, or did not report reaching it, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf built-in oven error code 06 0 0

Wolf error code 06 0 0: the appliance has recorded something it cannot describe further, usually alongside another code, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.

Wolf SO24TE repair

Wolf SO24TE repair in Miami: what owners of this E Series legacy unit search for, what those symptoms usually point at, and what the work involves. Diagnostic from $95, credited toward the repair.

• Wolf so24te error code e05
• Wolf so24 oven error