Error code
Wolf built-in oven error code E58
Wolf error code E58: the appliance is measuring its own electricity supply and does not like what it sees, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code E58, from the manufacturer's own documentation
A code is only meaningful together with the generation showing it — the same two digits mean different things across generations, and that is the commonest reason a code looked up online leads somewhere wrong. This one is recorded on E Series legacy.
The code
E58
The appliance is measuring its own electricity supply and does not like what it sees, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out
or call (305) 449-9681
What it narrows down to
No wire connected to L2 terminal or no voltage on L2
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Sometimes the house rather than the oven Oven dead after a power cut
The storm passed, everything else came back on, and the oven did not. On this brand the appliance often has a specific opinion about what the electricity did, and it is worth reading before anybody is called.
- Dead since an outage or a surge
- Working, but complaining about voltage
- A neutral or leg condition on the display
On the same generation
What else belongs to the E Series legacy
A code belongs to a generation rather than to one cabinet. These are the other codes yours can show, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this generation can display
RTD Shorted
No Broil Element detected
Lock/Door inputs to the control board are invalid for cleaning
No published cause
DLB2 relay open
RM HIV Fuse Error
Oxidized contacts between relay board and door lock motor
RTD Circuitry error
Touch pad communication error detected by the user interface module
HIV SPI Com Err Detected by HV-Micro
HSWD active, should be inactive
RM Ambient Thermistor open
The same two digits mean different things across generations. Search the full code list
Models that can display this code
The number on the data plate decides which parts exist and how quickly they arrive. All models
In more detail
About Wolf built-in oven error code E58
What this one means
The appliance is measuring its own electricity supply and does not like what it sees, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- A supply running high or low at the panel
- A neutral broken somewhere in the house wiring rather than in the appliance
- The two legs of a 240-volt feed not being two separate legs
- No wire connected to L2 terminal or no voltage on L2
- Circuit breaker or fuse in house wiring tripped off
- L1 and L2 are the same supply leg
- Relay board faulty
Worth doing before you call
- Note which cavity it is on a double oven — the code says upper or lower and that is half the diagnosis
- Check whether anything else in the house has misbehaved at the same time
- Look at the breaker for this appliance and reset it once
Then what
This is one of the few codes that is usually about the house and not the machine. An electrician measures the supply; we measure what the appliance did with it.
This code is published for built-in ovens & steam ovens. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards