Error code
Wolf electric cooktop error code E16
Wolf error code E16: the control panel is reporting a key or a sensing pad that is not behaving, on an electric cooktop, a sealed sheet of glass with the entire control under it. What the code covers, what to check first, and what it does not tell you — on cooktops & rangetops.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code E16, from the manufacturer's own documentation
A code is only meaningful together with the generation showing it — the same two digits mean different things across generations, and that is the commonest reason a code looked up online leads somewhere wrong. This one is recorded on CT electric cooktop.
The code
E16
The control panel is reporting a key or a sensing pad that is not behaving, on an electric cooktop, a sealed sheet of glass with the entire control under it
or call (305) 449-9681
What it narrows down to
Keyboard error
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Water reads as a hundred fingers Cooktop controls locked or acting alone
A touch surface that will not respond, or that changes settings by itself. On a glass cooktop the commonest cause is on top of the panel rather than under it, and it costs nothing to fix.
- A panel that ignores every press
- Settings changing by themselves
- A lock symbol nobody set
On the same generation
What else belongs to the CT electric cooktop
A code belongs to a generation rather than to one cabinet. These are the other codes yours can show, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this generation can display
Ambient temperature too high
Generator heat sink temperature too high
Open ambient thermistor
Shorted sensors
Model value change
Display board detected network error
No published cause
Keyboard calibration error
The same two digits mean different things across generations. Search the full code list
In more detail
About Wolf electric cooktop error code E16
What this one means
The control panel is reporting a key or a sensing pad that is not behaving, on an electric cooktop, a sealed sheet of glass with the entire control under it. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- A key held down by something resting on the panel
- A capacitive pad reading a wet cloth as a finger
- The touch board itself, once the panel is dry and clear
- Keyboard error
What to try yourself
- Take everything off the glass, including a cloth or a hot pan lid over the controls
- Wipe the panel dry and take everything off it, including a towel over the handle
- Switch the breaker off for thirty seconds so the panel recalibrates on power-up
Then what
Capacitive panels calibrate to what they can see when they wake, which is why a cloth left on one at power-up produces an error that a reset clears. If it survives a clean, dry restart, it is the board.
This code is published for cooktops & rangetops. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards