Error code
Wolf built-in oven error code: bake stone
Wolf error code, the kind with no number: bake stone on a built-in oven — the appliance has recorded something it cannot describe further, usually alongside another code, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. What it covers, what to check first, and what it does not tell you, on built-in ovens & steam ovens.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code BAKE STONE, from the manufacturer's own documentation
This code has no number, because this equipment has no display to put one on. The appliance signals it instead — an alarm, a symbol or a pattern of lights — and what it means is recorded in the documentation that ships with it, for L Series.
The code
BAKE STONE
The appliance has recorded something it cannot describe further, usually alongside another code, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out
or call (305) 449-9681
What it narrows down to
No published cause
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Which board stopped talking Oven display blank, frozen or erratic
A display that has gone blank, frozen part-way, or is showing something that makes no sense. The appliance often still works underneath, which is a clue rather than a comfort.
- Blank display and an oven that still heats
- Characters frozen or scrambled
- A communication or checksum message
On the same generation
What else belongs to the L Series
A code belongs to a generation rather than to one cabinet. These are the other codes yours can show, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this generation can display
RM EE Checksum error
Communication lost with the oven controller
Cooling fan apparency switch reports cooling fan failure
Door lock or unlock switches not sensed within 60 seconds
Key communication error
Lower oven shift register feedback indicated failure
No published cause
The same two digits mean different things across generations. Search the full code list
In more detail
About Wolf built-in oven error code: bake stone
What this one means
The appliance has recorded something it cannot describe further, usually alongside another code, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. This is a code without a number: the panel spells it out in words rather than digits, which is how the older controls on this make report a handful of conditions. What it means comes from the manufacturer's own documentation rather than from us.
How it shows on the display
There is no number to write down here, so this is what the panel actually shows:
- BAKE STONE
What sets it off
An alarm is deliberately broad — it tells you the cabinet noticed something, not which part is responsible. This one comes on for:
- Whatever the other code on the display is about
- A one-off event during a power interruption
What to try yourself
- Note which cavity it is on a double oven — the code says upper or lower and that is half the diagnosis
- Write down every code shown, not only this one
- Switch the breaker off for thirty seconds and back on
Then what
On its own this one says very little. Beside another code it is background; the other code is the one to read.
This one appears on built-in ovens & steam ovens. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards