Error code
Wolf induction cooktop error code 3
Wolf error code 3: the board is reading something impossible, and the usual reason on this equipment is damp rather than a dead component, on an induction cooktop, where the generator under each zone is a power supply in its own right and reports for itself. What the code covers, what to check first, and what it does not tell you — on cooktops & rangetops.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code 3, from the manufacturer's own documentation
A code is only meaningful together with the generation showing it — the same two digits mean different things across generations, and that is the commonest reason a code looked up online leads somewhere wrong. This one is recorded on CI induction cooktop.
The code
3
The board is reading something impossible, and the usual reason on this equipment is damp rather than a dead component, on an induction cooktop, where the generator under each zone is a power supply in its own right and reports for itself
or call (305) 449-9681
What it narrows down to
Water on the glass over the control area of the control board
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Water reads as a hundred fingers Cooktop controls locked or acting alone
A touch surface that will not respond, or that changes settings by itself. On a glass cooktop the commonest cause is on top of the panel rather than under it, and it costs nothing to fix.
- A panel that ignores every press
- Settings changing by themselves
- A lock symbol nobody set
On the same generation
What else belongs to the CI induction cooktop
A code belongs to a generation rather than to one cabinet. These are the other codes yours can show, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this generation can display
No published cause
Data flash error
LIN communication error
Pad error
Generator 3 heatsink temperature too high
Electrical supply error
Unspecified error
Generator 2 communication error
Controller error
Over voltage
The same two digits mean different things across generations. Search the full code list
Models that can display this code
The number on the data plate decides which parts exist and how quickly they arrive. All models
In more detail
About Wolf induction cooktop error code 3
What this one means
The board is reading something impossible, and the usual reason on this equipment is damp rather than a dead component, on an induction cooktop, where the generator under each zone is a power supply in its own right and reports for itself. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- Condensation on the control or relay board after a steamy cook
- A spill that has run down behind the fascia
- Electrical noise from something else on the same circuit
- Water on the glass over the control area of the control board
- Cookware on the glass over the control area of the control board
What to try yourself
- Note whether one zone is affected or all of them — each has its own generator
- Switch the appliance off at the breaker for half an hour and let it dry
- Look for a recent spill or a kettle or steam oven venting straight at the fascia
Then what
Damp clears on its own more often than people expect, so the wait is worth doing before anybody is called. A board that reads the same after drying has taken the damage rather than the water.
This code is published for cooktops & rangetops. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards