Error code
Wolf warming drawer error code 60
Wolf error code 60: something inside is hotter than the control is prepared to allow, and it has stopped rather than carry on, on a warming drawer, a shallow heated cavity on a slide that holds food at a set temperature for hours rather than cooking it. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code 60, from the manufacturer's own documentation
A code is only meaningful together with the generation showing it — the same two digits mean different things across generations, and that is the commonest reason a code looked up online leads somewhere wrong. This one is recorded on Warming drawer.
The code
60
Something inside is hotter than the control is prepared to allow, and it has stopped rather than carry on, on a warming drawer, a shallow heated cavity on a slide that holds food at a set temperature for hours rather than cooking it
or call (305) 449-9681
What it narrows down to
Warming Drawer temperature rises to 250ºF in any mode/state
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
The drawer says which, in a number Warming drawer not heating
The drawer runs, the display looks normal, and what comes out is no warmer than the room — or it heats for a while and shuts itself down. This appliance publishes conditions for both, and the number on the panel names the circuit.
- Food no warmer than the kitchen
- Heats, then stops after an hour or two
- A 40 or a 60 on the display
On the same generation
What else belongs to the Warming drawer
A code belongs to a generation rather than to one cabinet. These are the other codes yours can show, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this generation can display
Incorrect checksum
Element sensing error
Door switch closed when touch pad is operating or unit is turning on
No published cause
The same two digits mean different things across generations. Search the full code list
Models that can display this code
The number on the data plate decides which parts exist and how quickly they arrive. All models
In more detail
About Wolf warming drawer error code 60
What this one means
Something inside is hotter than the control is prepared to allow, and it has stopped rather than carry on, on a warming drawer, a shallow heated cavity on a slide that holds food at a set temperature for hours rather than cooking it. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- An outdoor drawer in direct sun, which the maker names as a cause in its own right
- An installation that does not let the cavity breathe
- The sensing that watches the cavity temperature
- Warming Drawer temperature rises to 250ºF in any mode/state
What to try yourself
- Check the drawer closes fully and nothing is holding it open — the drawer will not run with the switch open
- If it is outdoors, note whether it happens in the afternoon — sun alone can do this
- Check the installation clearances, and let it cool completely before restarting
Then what
An over-temperature stop is a protection working rather than a part failing. On an outdoor drawer the reason is very often the weather, which is worth establishing before anybody is called; indoors it is the cabinet or the sensing.
This code is published for built-in ovens & steam ovens. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards