Error code
Wolf convection steam oven error code E118
Wolf error code E118: the motorized door lock did not reach the position it was told to reach, or did not report reaching it, on a convection steam oven, which carries a boiler, a tank and a vent valve that no other oven in this kitchen has. What the code covers, what to check first, and what it does not tell you — on built-in ovens & steam ovens.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code E118, from the manufacturer's own documentation
A code is only meaningful together with the generation showing it — the same two digits mean different things across generations, and that is the commonest reason a code looked up online leads somewhere wrong. This one is recorded on Convection steam oven.
The code
E118
The motorized door lock did not reach the position it was told to reach, or did not report reaching it, on a convection steam oven, which carries a boiler, a tank and a vent valve that no other oven in this kitchen has
or call (305) 449-9681
What it narrows down to
Door lock
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
The one worth calling about today Oven door locked shut
The door will not open, usually after a cleaning cycle. Everything else on this site can wait a few days; this cannot, because the oven is not degraded — it is unusable.
- Locked after self-clean and the oven is cold
- A lock symbol that will not clear
- A cycle that will not start because it cannot lock
On the same generation
What else belongs to the Convection steam oven
A code belongs to a generation rather than to one cabinet. These are the other codes yours can show, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this generation can display
Problems with control board caused by moisture or EMC influences
Control board issues caused by moisture or EMC influence
Moisture on control board
Process data error
No published cause
Processor faulty
Short circuit in PT sensor or in its wiring
Sensor with too high of resistance
Moisture on relay board
No communication with control board
No communication with relay board
Communication between relay board and control board is incompatible
The same two digits mean different things across generations. Search the full code list
Models that can display this code
The number on the data plate decides which parts exist and how quickly they arrive. All models
In more detail
About Wolf convection steam oven error code E118
What this one means
The motorized door lock did not reach the position it was told to reach, or did not report reaching it, on a convection steam oven, which carries a boiler, a tank and a vent valve that no other oven in this kitchen has. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- The lock motor and its microswitches
- The wiring between the lock and the board
- A latch fouled by a rack, a spill or a warped gasket
- Door lock
Worth doing before you call
- Check the water tank is seated and that the drain and fill paths are clear
- Let a self-clean cycle cool completely — the door will not release while the cavity is hot
- Look for anything in the way of the latch at the top of the door frame
Then what
A door that will not unlock is the one error worth calling about the same day: the oven is unusable until it releases, and the assembly is behind the trim rather than in the cavity.
This code is published for built-in ovens & steam ovens. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards