Error code
Wolf induction range error code U400
Wolf error code U400: the appliance is measuring its own electricity supply and does not like what it sees, on an induction range, where the cooktop is a power electronics assembly and the oven below it is conventional. What the code covers, what to check first, and what it does not tell you — on ranges.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code U400, from the manufacturer's own documentation
A code is only meaningful together with the generation showing it — the same two digits mean different things across generations, and that is the commonest reason a code looked up online leads somewhere wrong. This one is recorded on Induction range legacy.
The code
U400
The appliance is measuring its own electricity supply and does not like what it sees, on an induction range, where the cooktop is a power electronics assembly and the oven below it is conventional
or call (305) 449-9681
What it narrows down to
Over voltage
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Sometimes the house rather than the oven Oven dead after a power cut
The storm passed, everything else came back on, and the oven did not. On this brand the appliance often has a specific opinion about what the electricity did, and it is worth reading before anybody is called.
- Dead since an outage or a surge
- Working, but complaining about voltage
- A neutral or leg condition on the display
On the same generation
What else belongs to the Induction range legacy
A code belongs to a generation rather than to one cabinet. These are the other codes yours can show, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this generation can display
Liquid or cookware on control glass
Input voltage > 300 Volts
Pad error
Data flash error
Invalid configuration
TC temperature too high
Controller options error
LIN communication error
Coil temperature too high
Configuration implausible
Electrical supply error
Unspecified error
The same two digits mean different things across generations. Search the full code list
In more detail
About Wolf induction range error code U400
What this one means
The appliance is measuring its own electricity supply and does not like what it sees, on an induction range, where the cooktop is a power electronics assembly and the oven below it is conventional. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- A supply running high or low at the panel
- A neutral broken somewhere in the house wiring rather than in the appliance
- The two legs of a 240-volt feed not being two separate legs
- Over voltage
Worth doing before you call
- Check whether the oven still heats with the cooktop off, and the other way round
- Check whether anything else in the house has misbehaved at the same time
- Look at the breaker for this appliance and reset it once
Then what
This is one of the few codes that is usually about the house and not the machine. An electrician measures the supply; we measure what the appliance did with it.
This code is published for ranges. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards