---
title: "Wolf induction cooktop error code E26"
description: "Wolf induction cooktop error code E26: wolf error code E26: the appliance is measuring its own electricity supply and does not like what it sees, on an…"
url: "https://wolfmiami.support/error-codes/error-code-e26-induction-cooktop/"
date_modified: "2026-08-20"
Product line: "Counter modules"
---


# Wolf induction cooktop error code E26

### What this one means

The appliance is measuring its own electricity supply and does not like what it sees, on an induction cooktop, where the generator under each zone is a power supply in its own right and reports for itself. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.

### What the code covers

A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:

- A supply running high or low at the panel
- A neutral broken somewhere in the house wiring rather than in the appliance
- The two legs of a 240-volt feed not being two separate legs
- Zero cross input signal is not present

### Worth doing before you call

- Note whether one zone is affected or all of them — each has its own generator
- Check whether anything else in the house has misbehaved at the same time
- Look at the breaker for this appliance and reset it once

### Then what

This is one of the few codes that is usually about the house and not the machine. An electrician measures the supply; we measure what the appliance did with it.

This code is published for cooktops & rangetops. The [full list of codes](https://wolfmiami.support/error-codes/) has the rest of them, searchable, including the labels older and newer machines use for the same conditions.

Cooktops & rangetops

What this code means

What this one means

The appliance is measuring its own electricity supply and does not like what it sees, on an induction cooktop, where the generator under each zone is a power supply in its own right and reports for itself. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.

What the code covers

A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:

A supply running high or low at the panel

A neutral broken somewhere in the house wiring rather than in the appliance

The two legs of a 240-volt feed not being two separate legs

Zero cross input signal is not present

Worth doing before you call

Note whether one zone is affected or all of them — each has its own generator

Check whether anything else in the house has misbehaved at the same time

Look at the breaker for this appliance and reset it once

Then what

This is one of the few codes that is usually about the house and not the machine. An electrician measures the supply; we measure what the appliance did with it.

This code is published for cooktops & rangetops. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.

---

**[Read full article: Wolf induction cooktop error code E26](https://wolfmiami.support/error-codes/error-code-e26-induction-cooktop/)**