---
title: "Wolf induction cooktop error code E10"
description: "Wolf induction cooktop error code E10: wolf error code E10: two boards inside the appliance have stopped hearing each other, on an induction cooktop, where…"
url: "https://wolfmiami.support/error-codes/error-code-e10-induction-cooktop/"
date_modified: "2026-08-20"
Product line: "Counter modules, CT induction cooktop"
---


# Wolf induction cooktop error code E10

### What this one means

Two boards inside the appliance have stopped hearing each other, on an induction cooktop, where the generator under each zone is a power supply in its own right and reports for itself. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.

### What the code covers

A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:

- The ribbon or harness between the control head and the board that switches the loads
- Either board's own transceiver
- A connector that has worked loose behind a fascia that gets hot every day
- Generator 3 communication error
- Generator 3 not communicating with control board properly
- Dry start at startup SM15TF/S: RTD steam fill is 18°F more than main RTD during the first 90 seconds
- FM15TF/S: RTD steam fill is 30°F more than main RTD during the first 120 seconds

### Worth doing before you call

- Note whether one zone is affected or all of them — each has its own generator
- Switch the breaker off for thirty seconds and back on, and see whether the display returns

### Then what

A network error is a wiring question before it is a parts question, and the wiring lives behind the control panel. It is not a panel a homeowner should have off with the appliance live.

This code is published for cooktops & rangetops. The [full list of codes](https://wolfmiami.support/error-codes/) has the rest of them, searchable, including the labels older and newer machines use for the same conditions.

Cooktops & rangetops

What this code means

What this one means

Two boards inside the appliance have stopped hearing each other, on an induction cooktop, where the generator under each zone is a power supply in its own right and reports for itself. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.

What the code covers

A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:

The ribbon or harness between the control head and the board that switches the loads

Either board's own transceiver

A connector that has worked loose behind a fascia that gets hot every day

Generator 3 communication error

Generator 3 not communicating with control board properly

Dry start at startup SM15TF/S: RTD steam fill is 18°F more than main RTD during the first 90 seconds

FM15TF/S: RTD steam fill is 30°F more than main RTD during the first 120 seconds

Worth doing before you call

Note whether one zone is affected or all of them — each has its own generator

Switch the breaker off for thirty seconds and back on, and see whether the display returns

Then what

A network error is a wiring question before it is a parts question, and the wiring lives behind the control panel. It is not a panel a homeowner should have off with the appliance live.

This code is published for cooktops & rangetops. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.

---

**[Read full article: Wolf induction cooktop error code E10](https://wolfmiami.support/error-codes/error-code-e10-induction-cooktop/)**