---
title: "Wolf built-in oven error code 01"
description: "Wolf built-in oven error code 01: wolf error code 01: a switching device is passing current when the control has told it to stop, on a built-in oven, where…"
url: "https://wolfmiami.support/error-codes/error-code-01-wall-oven/"
date_modified: "2026-08-20"
Product line: "E Series legacy"
---


# Wolf built-in oven error code 01

### What this one means

A switching device is passing current when the control has told it to stop, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.

### What the code covers

A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:

- A relay welded closed by years of switching a heavy load
- A triac that has failed short
- The element circuit that relay or triac feeds
- RTD Shorted

### Worth doing before you call

- Note which cavity it is on a double oven — the code says upper or lower and that is half the diagnosis
- Switch the appliance off at the breaker if it is heating with nothing selected

### Then what

A stuck relay is the one error in this archive that can heat with nothing asked of it, so it is a breaker-off condition rather than a wait-and-see one. The board carrying it is a replacement part.

This code is published for built-in ovens & steam ovens. The [full list of codes](https://wolfmiami.support/error-codes/) has the rest of them, searchable, including the labels older and newer machines use for the same conditions.

Built-in ovens & steam ovens

What this code means

What this one means

A switching device is passing current when the control has told it to stop, on a built-in oven, where every part named here sits behind trim that is screwed into the cabinetry rather than behind a panel that slides out. It is a code the manufacturer publishes for this appliance, not one we have worked out — and it is decoded here rather than left as three characters on a display.

What the code covers

A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:

A relay welded closed by years of switching a heavy load

A triac that has failed short

The element circuit that relay or triac feeds

RTD Shorted

Worth doing before you call

Note which cavity it is on a double oven — the code says upper or lower and that is half the diagnosis

Switch the appliance off at the breaker if it is heating with nothing selected

Then what

A stuck relay is the one error in this archive that can heat with nothing asked of it, so it is a breaker-off condition rather than a wait-and-see one. The board carrying it is a replacement part.

This code is published for built-in ovens & steam ovens. The full list of codes has the rest of them, searchable, including the labels older and newer machines use for the same conditions.

---

**[Read full article: Wolf built-in oven error code 01](https://wolfmiami.support/error-codes/error-code-01-wall-oven/)**